KEYESTUDIO Mega Plus 2560 R3 Board for Arduino with Type-C USB Cable, 2A Output, More Powerful MCU Contoller Board

KEYESTUIDO Mega plus R3 2560 Board, whose processor core is 2560-16AU, is fully compatible with MEGA REV3 2560. USB to TTL chip adopts more economic and stable CP2012. This plus board consists of 54-channel digital input and output ports, of which 15 pins are served as PWM output, 16 analog inputs, 4 serial communication ports, one 16MHz crystal oscillator, 1 USB port, 1 power socket, 1 ICSP interface and 1 reset button. Before using the KEYESTUDIO Mega Plus Board, you must install the driver of it, otherwise it will not communicate with computer. Unlike the USB series chip (ATMEGA8U2) of the mega, the KEYESTUDIO Mega Plus Board is used the CP2102 chip USB series. Note: 1. Please make sure that your IDE is updated to 1.8.0 or newer version, since the driver of the CP2102 chip is included in 1.8.0 version and newer version of IDE. 2.If the version of IDE you download is lower than 1.8, you should download the driver of CP2102 and install it manually. 1.Download the Windows Driver https://fs.keyestudio.com/CP2102-WIN 2. How_to_Install_the_Driver_of_CP2102_on_MAC_System https://wiki.keyestudio.com/How_to_Install_the_Driver_of_CP2102_on_MAC_System Specifications: Microcontroller: 2560-16AU USB to TTL chip：CP2102 Operating Voltage: 5V Input Voltage (recommended):DC 7-12V Digital I/O Pins: 54 (D0-D53) PWM Digital I/O Pins：15(D2-D13 D44-D46) Analog Input Pins: 16(A0-A15) DC Current per I/O Pin: 20mA DC Current for 3.3V Pin: 50mA Flash Memory: 256 KB of which 8 KB used by bootloader SRAM: 8KB EEPROM: 4KB Clock Speed: 16MHz LED_BUILTIN:D13 Special Interfaces Description Serial communication interface(4 channel): Serial（D0 =RX0, D1 =TX0）, Serial1（D19 is RX1, D18 is TX1) Serial2 （D17 is RX2, D16 equals to TX2）, Serial3（D15 is RX3, D14 is TX3), D0 and D1 are connected to ATMEGA16U2-MU

• This Mega Plus board can work like the Arduino Mega R3 2560 but it is more powerful and has more pins
• The USB-to-Serial chip of this board is stable and compatible CP2102; USB connector of it is Type C USB Port; Up to 5V, 1.5A output, can drive drive high-current devices like servo and motor
• Additional SPI communication interface, IIC communication interface, Serial communication interface(4 channel); Serial2 (D17 is RX2, D16 equals to TX2), Serial3 (D15 is RX3, D14 is TX3), D0 and D1 are connected to MCU; External interrupt pins
• The yellow text on black board makes identifying pinsets a breeze. FCC and CE is available
• How to use: Search for "keyestudio wiki KS0499" in Google Chrome to get the wiki online tutorial for this product. Technical supports are available at any time!